SMT1.0
The most user-friendly small automatic laminating machine
The main reasons for choosing an SMT1.0:
· Because it is ready to work in 5 minutes.
· Because it is easy to use.
· Because of its intuitive touch screen.
· Because it incorporates a REVERSE MODE to correct possible errors.
· Because it has a TAULER_GO ON (automatic start-up system).
· Because it only occupies 1.5m2.
· Because you can move it easily.
![SMT 1_0](https://www.tauler.net/wp-content/uploads/2024/06/SMT-1_0.png)
Advanced specifications:
- Automatic front suction introduction.
- Adjustable side brackets.
- Temperature control by sensor.
- Hydraulically operated pressure roller.
- Easily adjustable anticurling system.
- Photocells that stop the machine in case of blade failure.
- Total control of the machine by PLC.
- Electronically adjustable speed.
- Micro-perforated cutting system and scissor roller.
![midessmt1.0 Smart B3 Matic laminators](https://www.tauler.net/wp-content/uploads/2024/06/midessmt1.0.png)
Maximum length [A]: 265 cm
Maximum width [B]: 68 cm
Maximum height [C]: 165 cm
Weight: 200 kg
Technical details
Maximum format | 340×700 mm |
Minimum format | 148×210 mm |
Maximum mechanical speed | 5 – 10 m/min* |
Paper thickness | 157 a 400 g/m2 |
input/Output stack height | 450 mm |
Film thickness | 20 to 45 μm |
Electrical power installed |
2.2 kW |
Power supply | 220 V single phase 50 Hz |
Security | Protections according to CE standards, emergency stop and safety sensors. |
*According to film, external conditions, paper type, thickness, and formats.
TAULER reserves the right to modify the characteristics of this product without prior notice. The image shown and the information reflected in this web & brochure does not establish contractual information. TAULER AND PRINTLAM ARE REGISTRED TRADEMARKS OF TAULER LAMINATING TECH, SL
Contact Form
"*" indicates required fields